What To Know
- Gently push down on the green lever on the left side of the toner cartridge.
- Once the new toner cartridge is installed, the printer will automatically reset the toner counter.
- After resetting the toner counter, print a test page to ensure the new toner cartridge is working correctly.
Your Brother HL-L2370DW printer is a reliable companion for all your printing needs. However, like any machine, it requires occasional maintenance, including toner replacement. This blog post will provide a step-by-step guide on how to change toner in your Brother HL-L2370DW printer, ensuring optimal performance and vibrant prints.
Safety First
Before starting any maintenance task, it’s crucial to take safety precautions. Ensure the printer is turned off and unplugged from the power outlet. Allow it to cool down if it was recently in use.
Locate the Toner Cartridge
Open the front cover of the printer. The toner cartridge is located inside, easily accessible.
Remove the Old Toner Cartridge
Gently push down on the green lever on the left side of the toner cartridge. The cartridge will pop out slightly. Grasp it firmly and pull it straight out of the printer.
Unpack the New Toner Cartridge
Remove the new toner cartridge from its packaging. Gently shake it from side to side to evenly distribute the toner powder inside.
Install the New Toner Cartridge
Align the new toner cartridge with the slots inside the printer. Insert it carefully, pushing it straight in until it clicks into place.
Close the Printer Cover
Close the front cover of the printer firmly.
Reset the Toner Counter
Once the new toner cartridge is installed, the printer will automatically reset the toner counter. If it doesn’t, follow these steps:
1. Press the “Menu” button on the control panel.
2. Use the arrow keys to navigate to “System Settings” and press “OK.”
3. Select “Reset” and press “OK.”
4. Choose “Toner Counter Reset” and press “OK.”
Print a Test Page
After resetting the toner counter, print a test page to ensure the new toner cartridge is working correctly.
Additional Tips
- Use only genuine Brother toner cartridges to maintain the printer’s warranty and ensure optimal performance.
- Store unused toner cartridges in a cool, dry place away from direct sunlight.
- If you notice any print quality issues after changing the toner, try cleaning the printer’s fuser unit or imaging drum.
Troubleshooting Common Issues
Printer Not Recognizing New Toner Cartridge
- Make sure the toner cartridge is properly installed and clicked into place.
- Check if the protective tape on the toner cartridge has been removed.
- Reset the toner counter as described above.
Toner Smudging or Streaking
- Clean the printer’s imaging drum by following the instructions in the user manual.
- Use high-quality paper designed for laser printers.
- Check if the fuser unit is dirty and needs cleaning.
Low Toner Warning Appearing Prematurely
- The toner counter may not have been reset properly. Reset it again as described above.
- The printer may be set to a high toner coverage mode. Adjust the toner coverage settings in the printer’s menu.
Questions You May Have
How often should I change the toner in my Brother HL-L2370DW printer?
The frequency of toner replacement depends on your printing volume. The printer will display a warning when the toner level is low.
Can I use third-party toner cartridges in my Brother HL-L2370DW printer?
Using third-party toner cartridges may void the printer’s warranty and affect print quality. It’s recommended to use genuine Brother toner cartridges.
What is the average lifespan of a toner cartridge for the Brother HL-L2370DW printer?
The average lifespan of a toner cartridge for the Brother HL-L2370DW printer is approximately 1,200 pages.
