Quick Overview
- In the “IP Address” field, enter the IP address of the device you want to forward the ports to.
- Make sure that you are connected to the router’s Wi-Fi network or that you are using an Ethernet cable to connect to the router.
- You can reset your router to its factory default settings by pressing and holding the reset button on the back of the router for 10 seconds.
If you’re looking to configure your D-Link DIR-650IN router, you’ve come to the right place. In this comprehensive guide, we’ll walk you through every step of the process, from connecting your router to your modem to setting up your wireless network.
What You’ll Need
Before you begin, you’ll need the following:
- Your D-Link DIR-650IN router
- An Ethernet cable
- Your modem
- A computer or mobile device
Step 1: Connect Your Router to Your Modem
1. Connect one end of an Ethernet cable to the WAN port on your D-Link DIR-650IN router.
2. Connect the other end of the Ethernet cable to an available Ethernet port on your modem.
Step 2: Power On Your Router
1. Plug the power adapter into your D-Link DIR-650IN router.
2. Turn on the power switch.
Step 3: Access the Router’s Web Interface
1. Open a web browser on your computer or mobile device.
2. In the address bar, type the following:
“`
http://192.168.0.1
“`
3. Press Enter.
4. You will be prompted to enter a username and password. The default username is “admin” and the default password is “password”.
Step 4: Configure Your Wireless Network
1. Click on the “Wireless” tab.
2. Select the “Basic Settings” sub-tab.
3. In the “SSID” field, enter a name for your wireless network.
4. In the “Security Mode” field, select “WPA2-Personal”.
5. In the “WPA2-Personal Key” field, enter a password for your wireless network.
6. Click on the “Save Settings” button.
Step 5: Connect to Your Wireless Network
1. On your computer or mobile device, open the Wi-Fi settings.
2. Select your wireless network from the list of available networks.
3. Enter the password you created in Step 4.
Step 6: Configure Your Firewall
1. Click on the “Firewall” tab.
2. Select the “Basic Settings” sub-tab.
3. In the “Firewall Mode” field, select “Enable”.
4. Click on the “Save Settings” button.
Step 7: Configure Your Port Forwarding
1. Click on the “Advanced” tab.
2. Select the “Port Forwarding” sub-tab.
3. Click on the “Add” button.
4. In the “Service Name” field, enter a name for the port forwarding rule.
5. In the “Port Range” field, enter the port range you want to forward.
6. In the “IP Address” field, enter the IP address of the device you want to forward the ports to.
7. Click on the “Save Settings” button.
Recommendations
Congratulations! You have now successfully configured your D-Link DIR-650IN router. If you have any further questions, please refer to the FAQ section below.
Common Questions and Answers
Q: I can’t access the router’s web interface.
A: Make sure that you are connected to the router’s Wi-Fi network or that you are using an Ethernet cable to connect to the router. Also, make sure that you are using the correct IP address to access the web interface.
Q: I forgot my router’s password.
A: You can reset your router to its factory default settings by pressing and holding the reset button on the back of the router for 10 seconds.
Q: I’m having trouble connecting to my wireless network.
A: Make sure that your wireless network is enabled and that you are using the correct password. Also, make sure that your computer or mobile device is within range of the router.