Surface go stuck on no bootable device? here’s how to fix it instantly!

Are you facing the frustrating “No Bootable Device” error on your Surface Go? Don’t worry, you’re not alone. This common issue can be resolved with a few simple troubleshooting steps. In this comprehensive guide, we’ll provide you with a step-by-step approach to fix the Surface Go no bootable device error and restore your device to working order.

Causes of Surface Go “No Bootable Device” Error

Several factors can contribute to the “No Bootable Device” error on Surface Go, including:

• Corrupted BIOS settings
• Damaged or missing boot device
• Failed operating system updates
• Hardware issues

Troubleshooting Steps

1. Check BIOS Settings

• Power on your Surface Go.
• Press the **Volume Up** and **Power** buttons simultaneously until the Surface logo appears.
• Navigate to the **Boot Configuration** tab.
• Ensure that the **Boot Device** is set to the **correct drive**.
• Save your changes and **exit** BIOS.

2. Reseat the SSD

• Power off your Surface Go.
• Flip the device upside down and **remove** the kickstand.
• Unscrew the two screws holding the SSD cover in place.
• Gently lift the SSD cover and **disconnect** the SSD.
• Reconnect the SSD and **reinstall** the cover.
• Tighten the screws and **flip** the Surface Go back over.

3. Create a USB Recovery Drive

• Download the Surface Recovery Image from Microsoft’s website.
• Run the downloaded file and **follow** the on-screen instructions.
• Insert a USB drive into your computer and **select** it as the destination for the recovery image.
• Click **Create** to begin the process.

4. Boot from USB Recovery Drive

• Power off your Surface Go.
• Insert the USB recovery drive into a USB port.
• Press the **Volume Down** and **Power** buttons simultaneously.
• Release the buttons when the Surface logo appears.
• Follow the on-screen instructions to **reinstall** Windows.

5. Run Hardware Diagnostics

• Power on your Surface Go.
• Press the **Volume Up** and **Power** buttons simultaneously until the Surface logo appears.
• Navigate to the **Diagnostics** tab.
• Select **Run Diagnostics** and **follow** the on-screen instructions.

6. Contact Microsoft Support

If the above steps do not resolve the issue, you may need to contact Microsoft Support for further assistance. Visit the Microsoft Support website or call their support line.

7. Other Possible Solutions

• Reset BIOS to default settings: This can be done by removing the CMOS battery or by using the BIOS reset jumper.
• Update BIOS: Check for any available BIOS updates from Microsoft.
• Reinstall Windows from a local image: If you have a local image of Windows, you can reinstall it using the Windows Installation Media.

Recommendations

By following the troubleshooting steps outlined in this guide, you should be able to resolve the Surface Go “No Bootable Device” error and restore your device to working condition. If the issue persists, do not hesitate to contact Microsoft Support for additional assistance. Remember, patience and attention to detail are crucial in troubleshooting this error.

Common Questions and Answers

Q: Why does my Surface Go show “No Bootable Device“?
A: This error can occur due to corrupted BIOS settings, damaged boot device, failed operating system updates, or hardware issues.

Q: How do I fix the Surface Go “No Bootable Device” error?
A: Follow the troubleshooting steps in this guide, including checking BIOS settings, reseating the SSD, creating a USB recovery drive, and running hardware diagnostics.

Q: Can I fix the Surface Go “No Bootable Device” error on my own?
A: Yes, most of the troubleshooting steps can be performed by following the instructions in this guide. However, if the issue persists, it is recommended to contact Microsoft Support.