Main points
- On most Velop models, the reset button is located on the bottom of the device.
- If you cannot locate the reset button on your Velop node, you can use a paperclip to perform a factory reset.
- If you have the Linksys app installed on your mobile device, you can use it to reset your Velop mesh system.
Experiencing connectivity issues with your Linksys Velop mesh system? A simple reset might be the solution you seek. Resetting your mesh system can resolve a range of problems, from sluggish internet speeds to persistent dropouts. This comprehensive guide will walk you through the step-by-step process of resetting your Linksys Velop mesh, restoring it to its optimal performance.
Types of Reset
There are two types of resets available for Linksys Velop mesh systems:
- Soft Reset: Restores network settings without erasing user configurations.
- Factory Reset: Completely wipes all settings and configurations, returning the system to its factory default state.
When to Perform a Reset
Consider resetting your Linksys Velop mesh system if you encounter any of the following issues:
- Poor internet connectivity
- Frequent network dropouts
- Slow internet speeds
- Device connectivity problems
- Login issues
How to Soft Reset Linksys Velop Mesh
Step 1: Locate the Reset Button
On most Velop models, the reset button is located on the bottom of the device. It may be recessed, so use a paperclip or similar object to press it.
Step 2: Press and Hold the Reset Button
Press and hold the reset button for about 10 seconds. The LED light on the Velop node will begin to blink rapidly.
Step 3: Release the Reset Button
Once the LED light stops blinking and turns solid, release the reset button. The Velop node has now been soft reset.
How to Factory Reset Linksys Velop Mesh
Step 1: Access the Web Interface
Open a web browser and navigate to the Linksys Velop web interface at http://192.168.1.1.
Step 2: Log In
Enter the default username and password (both are “admin”). If you have changed the credentials, enter your custom ones.
Step 3: Navigate to Advanced Settings
Click on the “Advanced” tab in the top menu bar.
Step 4: Find the Factory Reset Option
Under the “Administration” section, select “Factory Defaults.”
Step 5: Confirm the Reset
Click on the “Restore Factory Defaults” button. Confirm the reset by clicking “OK.”
Step 6: Wait for the Reset to Complete
The Velop system will now restart and restore itself to factory settings. This process can take several minutes.
How to Reset a Linksys Velop Node Individually
If you have multiple Velop nodes and only one is experiencing issues, you can reset that node individually:
- Unplug the Node: Disconnect the problematic Velop node from its power source.
- Press and Hold the Reset Button: While the node is unplugged, press and hold the reset button for 10 seconds.
- Plug the Node Back In: Once the LED light stops blinking and turns solid, plug the node back into its power source.
- Wait for the Reset to Complete: The node will now restart and join the mesh network.
How to Reset a Linksys Velop Mesh System with a Paperclip
If you cannot locate the reset button on your Velop node, you can use a paperclip to perform a factory reset:
- Find the Reset Hole: On the bottom of the Velop node, there is a small hole labeled “Reset.”
- Insert the Paperclip: Gently insert a straightened paperclip into the reset hole and press until you feel resistance.
- Hold for 10 Seconds: Hold the paperclip in the reset hole for approximately 10 seconds.
- Release the Paperclip: Once the LED light stops blinking and turns solid, release the paperclip.
How to Reset a Linksys Velop Mesh System with the Linksys App
If you have the Linksys app installed on your mobile device, you can use it to reset your Velop mesh system:
- Open the Linksys App: Launch the Linksys app on your smartphone or tablet.
- Select Your System: Tap on the “System” icon in the bottom menu bar.
- Find the Reset Option: Scroll down and select “Reset.”
- Confirm the Reset: Tap on the “Reset to Factory Defaults” button and confirm the reset.
Troubleshooting Reset Issues
- Reset Button Not Responding: Ensure that you are pressing the correct button and holding it for the full 10 seconds.
- LED Light Not Blinking: If the LED light does not blink after pressing the reset button, try unplugging and replugging the Velop node.
- System Not Joining the Mesh Network: After a reset, the Velop nodes may take some time to join the mesh network. Be patient and allow them to connect.
Wrapping Up: Reconnecting to Your Mesh Network
Once you have successfully reset your Linksys Velop mesh system, you will need to reconfigure your network settings. This includes setting up your Wi-Fi network name and password, as well as connecting your devices to the network.
Answers to Your Questions
1. How often should I reset my Linksys Velop mesh system?
Resetting your mesh system is not necessary on a regular basis. However, if you encounter any of the issues mentioned earlier, a reset may resolve them.
2. Will resetting my Linksys Velop mesh system erase my user configurations?
A soft reset will not erase your user configurations, but a factory reset will.
3. How long does it take to factory reset a Linksys Velop mesh system?
A factory reset can take several minutes to complete. Be patient and do not unplug the system during this process.